Sheet Piling Systems  
 
 

Technical Papers and Reference Documents

 

CMI Technical Papers


Estimating Material Requirements

Product Design Theory and Basic Engineering Properties

Fundamentals of Wall Design


Hydraulic Performance - Transmissivity and Permeability

Design Stress for Vinyl Sheet Piling

Corrosion Resistance of Aluminum

Deflection and Design for Composite (FRP) Sheet Piling

Strength Rating of Composite (FRP) Sheet Piling


Deflection of Vinyl Sheet Piling


Designing with Aluminum Sheet Piling


Using Section Modulus to Select and Compare Vinyl Sheet Piling




Related Technical Papers


EM 1110-2-1614 Design of Seawalls and Bulkheads

EM 1110-2-2504 Design of Sheet Pile Walls

EM 1110-2-1617 Design of Breakwaters

EM 1110-2-2904 Design of Breakwaters

EM 1110-2-1601 Design of Flood Control Channels

EM 1110-2-1901 Seepage Through Levees

EM 1110-1-1906 Blow Count Test

EM 1110-2-1414 Water Levels and Wave Heights

Chemical Resistance Guide for Plastics

EM 1110-2-1204 Coastal Shore Protection

EM 1110-2-1206 Engineering Small Boat Basins


EM 1110-2-1913 Design & Construction of Levees

EM 1110-2-301 Floodwalls and Levees

EM 1110-2-2502 Design of Floodwalls

EM 110-1-1804 Geotechnical Investigations

EM 1110-1-1905 Bearing Capacity of Soils

USACE- Study of the Long-term Applications of
Vinyl Sheet Piles



Related Links


The Vinyl Institute

Adeka Sealant

The Aluminum Association

ASTM International

Warranty Information


Vinyl Sheet Piling Warranty: ShoreGuard and C-Loc

Composite (FRP) Warranty: GeoGuard

Aluminum Sheet Piling and Accessories Warranty: Shore-All




ShoreGuard Elite Wall: Facing Panel Warranty

Sheet Piling Accesories Warranty: Armorware

Additional Assistance

 
Physical properties are defined by ASTM testing standards, The Aluminum Association Design Manual, and/or standard engineering practice. The values shown are nominal and may vary. The information found in this document is believed to be true and accurate. No warranties of any kind are made as to the suitability of any CMI product for particular applications or the results obtained there from. ShoreGuard, C-Loc, TimberGuard, GeoGuard, Dura Dock, Shore-All, and Gator Gates are registered trademarks of Crane Materials International. ArmorWare, Ultra Composite, GatorDocks, GatorBridge and CMI Waterfront Solutions are trademarks of Crane Materials International. United States and International Patent numbers 5,145,287; 5,881,508; 6,000,883; 6,033,155; 6,053,666; D420,154; 4,674,921; 4,690,588; ;7,393,482; 5,292,208; 6,575,667; 7,059,807; 7,056,066; 7,025,539; 1,245,061; Other patents pending. © 2008 Crane Materials International. All Rights Reserved.